FCS Digital

How to Use This Site

This page offers assistance in the following: Product searching, Product ordering, Recently added items, Measuring and sizing items.

Product ordering ... The ordering process is easily understandable, however in addition.. Many products have choices and require selection from a drop down list. For example Percussion hammer 158/159, a choice of Right hand, Left hand or a Pair - are given.

Items without choices ... The price of the item is stated with the description next to the image.

Items with choices ... The item price is stated within the text of the drop down list.

Please note that Value Added Tax (VAT), is additional to any orders despatched within the European Union.

Recently added items ... Any items that have been added to the catalogue since the last update (see front page) will be listed in the "Latest Additions" section.

Measuring and sizing items

Flintcocks are measured from the centre of the square to the tip of the bottom jaw, this will be stated in Imperial and Metric e.g -1.1/2" - 38.1mm.

Any compatable parts to the item will be listed as follows...
+ LP000 (Lockplate) F000 (Frizzen) FS000 (Frizzen spring) MS (Main spring) INT (Internals)

The Flintcock can be purchased as FLINTCOCK ONLY, with TOP JAW or TOP JAW only. Make your choice from the drop down list.

When LEFT and RIGHT items are displayed on the same product image, if you require both, you need to simply order the product as right and left hand, then "add to basket".

Frizzens are measured as follows : A = From the back face to the centre of the pivot hole, also B = The width of the Pan cover.

Lockplates are measured from end to end, height behind the pan fence, also from end to the centre of the pan. A faxed template can be requested if required

Should you have any special requirements, for example an alteration to a standard casting that you would wish to discuss then please contact us by one of the following methods.....

Telephone:44 (0)1502 470047
Fax:44 (0)1502 470048

Main office, Foundry and Workshops:-
Unit 30 - 31, Ellough Industrial Estate, Beccles, Suffolk, NR34 7TD, ENGLAND.